From b01e9348e106544e50691252bf58cde239681f19 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 4 Sep 2017 15:22:42 +0200
Subject: [PATCH] mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
Git-commit: b01e9348e106544e50691252bf58cde239681f19
Patch-mainline: v4.14-rc1
References: bsc#1051510
Both Bay and Cherry Trail devices may be used together with a Crystal Cove
PMIC. Each platform has its own variant of the PMIC, which both use the
same ACPI HID, but they are not 100% compatible.
This commits makes the intel_soc_pmic_core code check the _HRV of the
ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp.
intel_soc_pmic_config_cht_crc based on this.
This fixes the Bay Trail specific ACPI OpRegion code causing problems
on Cherry Trail devices. Specifically this was causing the external
microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work
and the eMMC to become unreliable and throw lots of errors.
Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver")
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/mfd/Kconfig | 4 ++--
drivers/mfd/intel_soc_pmic_core.c | 32 +++++++++++++++++++++++++++-----
2 files changed, 29 insertions(+), 7 deletions(-)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -448,12 +448,12 @@ config LPC_SCH
config INTEL_SOC_PMIC
bool "Support for Crystal Cove PMIC"
- depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
+ depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
depends on X86 || COMPILE_TEST
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- select I2C_DESIGNWARE_PLATFORM if ACPI
+ select I2C_DESIGNWARE_PLATFORM
help
Select this option to enable support for Crystal Cove PMIC
on some Intel SoC systems. The PMIC provides ADC, GPIO,
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -16,6 +16,7 @@
* Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/i2c.h>
@@ -28,6 +29,10 @@
#include <linux/pwm.h>
#include "intel_soc_pmic_core.h"
+/* Crystal Cove PMIC shares same ACPI ID between different platforms */
+#define BYT_CRC_HRV 2
+#define CHT_CRC_HRV 3
+
/* Lookup table for the Panel Enable/Disable line as GPIO signals */
static struct gpiod_lookup_table panel_gpio_table = {
/* Intel GFX is consumer */
@@ -48,16 +53,33 @@ static int intel_soc_pmic_i2c_probe(stru
const struct i2c_device_id *i2c_id)
{
struct device *dev = &i2c->dev;
- const struct acpi_device_id *id;
struct intel_soc_pmic_config *config;
struct intel_soc_pmic *pmic;
+ unsigned long long hrv;
+ acpi_status status;
int ret;
- id = acpi_match_device(dev->driver->acpi_match_table, dev);
- if (!id || !id->driver_data)
+ /*
+ * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry
+ * Trail version, use _HRV to differentiate between the 2.
+ */
+ status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Failed to get PMIC hardware revision\n");
return -ENODEV;
+ }
- config = (struct intel_soc_pmic_config *)id->driver_data;
+ switch (hrv) {
+ case BYT_CRC_HRV:
+ config = &intel_soc_pmic_config_byt_crc;
+ break;
+ case CHT_CRC_HRV:
+ config = &intel_soc_pmic_config_cht_crc;
+ break;
+ default:
+ dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv);
+ config = &intel_soc_pmic_config_byt_crc;
+ }
pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
@@ -157,7 +179,7 @@ MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_
#if defined(CONFIG_ACPI)
static const struct acpi_device_id intel_soc_pmic_acpi_match[] = {
- {"INT33FD", (kernel_ulong_t)&intel_soc_pmic_config_byt_crc},
+ { "INT33FD" },
{ },
};
MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match);