From: Salil Mehta <salil.mehta@huawei.com>
Date: Thu, 14 Dec 2017 18:03:05 +0000
Subject: net: hns3: Add HNS3 VF driver to kernel build framework
Patch-mainline: v4.16-rc1
Git-commit: e963cb789a29b890678b58ef7da5d7c497510b7e
References: bsc#1104353 FATE#326415

This patch introduces the new Makefiles and updates existing
Makefiles required to build the HNS3 Virtual Function driver.
This also updates the Kconfig for introduction of new menuconfig
entries related to VF driver.

Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/hisilicon/Kconfig              |   28 +++++++++++++-------
 drivers/net/ethernet/hisilicon/hns3/Makefile        |    2 +
 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile |    9 ++++++
 3 files changed, 30 insertions(+), 9 deletions(-)
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile

--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -94,15 +94,6 @@ config HNS3_HCLGE
 	  compatibility layer. The engine would be used in Hisilicon hip08 family of
 	  SoCs and further upcoming SoCs.
 
-config HNS3_ENET
-	tristate "Hisilicon HNS3 Ethernet Device Support"
-	depends on 64BIT && PCI
-	depends on HNS3 && HNS3_HCLGE
-	---help---
-	  This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
-	  family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
-	  devices and their associated operations.
-
 config HNS3_DCB
 	bool "Hisilicon HNS3 Data Center Bridge Support"
 	default n
@@ -112,4 +103,23 @@ config HNS3_DCB
 
 	  If unsure, say N.
 
+config HNS3_HCLGEVF
+    tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support"
+    depends on PCI_MSI
+    depends on HNS3
+	depends on HNS3_HCLGE
+    ---help---
+	  This selects the HNS3 VF drivers network acceleration engine & its hardware
+	  compatibility layer. The engine would be used in Hisilicon hip08 family of
+	  SoCs and further upcoming SoCs.
+
+config HNS3_ENET
+	tristate "Hisilicon HNS3 Ethernet Device Support"
+	depends on 64BIT && PCI
+	depends on HNS3
+	---help---
+	  This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
+	  family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
+	  devices and their associated operations.
+
 endif # NET_VENDOR_HISILICON
--- a/drivers/net/ethernet/hisilicon/hns3/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/Makefile
@@ -1,7 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # Makefile for the HISILICON network device drivers.
 #
 
 obj-$(CONFIG_HNS3) += hns3pf/
+obj-$(CONFIG_HNS3) += hns3vf/
 
 obj-$(CONFIG_HNS3) += hnae3.o
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Makefile for the HISILICON network device drivers.
+#
+
+ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+
+obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
+hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
\ No newline at end of file