From: Huazhong Tan <tanhuazhong@huawei.com>
Date: Mon, 3 Sep 2018 11:21:47 +0100
Subject: net: hns3: Fix for multicast failure
Patch-mainline: v4.20-rc1
Git-commit: fd5f9da3f6583046215d614a87792b46e55785e2
References: bsc#1104353 FATE#326415

When the lower 24 bits of the IPV6 link-local addresses at both
ends are the same, the multicast MAC address for Neigbour Discovery
is the same. The multicast for Neigbour Discovery will fail.

This patch fixes it by including the bonding uplink port in the
multicast group.

Fixes: 46a3df9f9718("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4362,7 +4362,7 @@ int hclge_add_mc_addr_common(struct hclg
 	hnae3_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 1);
-	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
+	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hclge_prepare_mac_addr(&req, addr);
 	status = hclge_lookup_mac_vlan_tbl(vport, &req, desc, true);
 	if (!status) {
@@ -4429,7 +4429,7 @@ int hclge_rm_mc_addr_common(struct hclge
 	hnae3_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 1);
-	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
+	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hclge_prepare_mac_addr(&req, addr);
 	status = hclge_lookup_mac_vlan_tbl(vport, &req, desc, true);
 	if (!status) {