From: Yunsheng Lin <linyunsheng@huawei.com>
Date: Wed, 20 Sep 2017 18:52:51 +0800
Subject: net: hns3: Fix initialization when cmd is not supported
Patch-mainline: v4.14-rc2
Git-commit: 2daf4a6536f3109ed0ed758cec14743e0e5c20ea
References: bsc#1104353 FATE#326415
When ae_dev doesn't support DCB, rx_priv_wl_config,
common_thrd_config and tm_qs_bp_cfg can't be called, otherwise
cmd return fail, which causes the hclge module initialization
process to fail.
This patch fix it by adding a DCB capability flag to check if
the ae_dev support DCB.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 7 ++++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 26 +++++++++-------
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 4 ++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 10 +++---
4 files changed, 31 insertions(+), 16 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -50,10 +50,17 @@
#define HNAE3_DEV_INITED_B 0x0
#define HNAE3_DEV_SUPPORT_ROCE_B 0x1
+#define HNAE3_DEV_SUPPORT_DCB_B 0x2
+
+#define HNAE3_DEV_SUPPORT_ROCE_DCB_BITS (BIT(HNAE3_DEV_SUPPORT_DCB_B) |\
+ BIT(HNAE3_DEV_SUPPORT_ROCE_B))
#define hnae3_dev_roce_supported(hdev) \
hnae_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_ROCE_B)
+#define hnae3_dev_dcb_supported(hdev) \
+ hnae_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_DCB_B)
+
#define ring_ptr_move_fw(ring, p) \
((ring)->p = ((ring)->p + 1) % (ring)->desc_num)
#define ring_ptr_move_bw(ring, p) \
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1772,18 +1772,22 @@ int hclge_buffer_alloc(struct hclge_dev
return ret;
}
- ret = hclge_rx_priv_wl_config(hdev);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "could not configure rx private waterline %d\n", ret);
- return ret;
- }
+ if (hnae3_dev_dcb_supported(hdev)) {
+ ret = hclge_rx_priv_wl_config(hdev);
+ if (ret) {
+ dev_err(&hdev->pdev->dev,
+ "could not configure rx private waterline %d\n",
+ ret);
+ return ret;
+ }
- ret = hclge_common_thrd_config(hdev);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "could not configure common threshold %d\n", ret);
- return ret;
+ ret = hclge_common_thrd_config(hdev);
+ if (ret) {
+ dev_err(&hdev->pdev->dev,
+ "could not configure common threshold %d\n",
+ ret);
+ return ret;
+ }
}
ret = hclge_common_wl_config(hdev);
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -976,6 +976,10 @@ int hclge_pause_setup_hw(struct hclge_de
if (ret)
return ret;
+ /* Only DCB-supported dev supports qset back pressure setting */
+ if (!hnae3_dev_dcb_supported(hdev))
+ return 0;
+
for (i = 0; i < hdev->tm_info.num_tc; i++) {
ret = hclge_tm_qs_bp_cfg(hdev, i);
if (ret)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -42,15 +42,15 @@ static const struct pci_device_id hns3_p
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_GE), 0},
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_25GE), 0},
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_25GE_RDMA),
- BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+ HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_25GE_RDMA_MACSEC),
- BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+ HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_50GE_RDMA),
- BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+ HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_50GE_RDMA_MACSEC),
- BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+ HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_100G_RDMA_MACSEC),
- BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+ HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
/* required last entry */
{0, }
};