From: Jakub Kicinski <jakub.kicinski@netronome.com>
Date: Wed, 17 Jan 2018 18:51:02 -0800
Subject: nfp: read ME frequency from vNIC ctrl memory
Patch-mainline: v4.16-rc1
Git-commit: ce991ab6662a1d11923ba17d482a77686f2a4b74
References: bsc#1109837

PCIe island clock frequency is used when converting coalescing
parameters from usecs to NFP timestamps.  Most chips don't run
at 1200MHz, allow FW to provide us with the real frequency.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_common.c |    2 +-
 drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.c   |   11 +++++++++++
 drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.h   |    7 +++++++
 drivers/net/ethernet/netronome/nfp/nfp_net_main.c   |    6 ------
 drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c |    6 ------
 5 files changed, 19 insertions(+), 13 deletions(-)

--- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
@@ -2458,7 +2458,7 @@ void nfp_net_coalesce_write_cfg(struct n
 	 * ME timestamp ticks.  There are 16 ME clock cycles for each timestamp
 	 * count.
 	 */
-	factor = nn->me_freq_mhz / 16;
+	factor = nn->tlv_caps.me_freq_mhz / 16;
 
 	/* copy RX interrupt coalesce parameters */
 	value = (nn->rx_coalesce_max_frames << 16) |
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.c
@@ -42,6 +42,7 @@
 static void nfp_net_tlv_caps_reset(struct nfp_net_tlv_caps *caps)
 {
 	memset(caps, 0, sizeof(*caps));
+	caps->me_freq_mhz = 1200;
 }
 
 int nfp_net_tlv_caps_parse(struct device *dev, u8 __iomem *ctrl_mem,
@@ -91,6 +92,16 @@ int nfp_net_tlv_caps_parse(struct device
 			dev_err(dev, "END TLV should be empty, has len:%d\n",
 				length);
 			return -EINVAL;
+		case NFP_NET_CFG_TLV_TYPE_ME_FREQ:
+			if (length != 4) {
+				dev_err(dev,
+					"ME FREQ TLV should be 4B, is %dB\n",
+					length);
+				return -EINVAL;
+			}
+
+			caps->me_freq_mhz = readl(data);
+			break;
 		default:
 			if (!FIELD_GET(NFP_NET_CFG_TLV_HEADER_REQUIRED, hdr))
 				break;
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.h
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.h
@@ -474,17 +474,24 @@
  * %NFP_NET_CFG_TLV_TYPE_END:
  * Empty, end of TLV list.  Must be the last TLV.  Drivers will stop processing
  * further TLVs when encountered.
+ *
+ * %NFP_NET_CFG_TLV_TYPE_ME_FREQ:
+ * Single word, ME frequency in MHz as used in calculation for
+ * %NFP_NET_CFG_RXR_IRQ_MOD and %NFP_NET_CFG_TXR_IRQ_MOD.
  */
 #define NFP_NET_CFG_TLV_TYPE_UNKNOWN		0
 #define NFP_NET_CFG_TLV_TYPE_RESERVED		1
 #define NFP_NET_CFG_TLV_TYPE_END		2
+#define NFP_NET_CFG_TLV_TYPE_ME_FREQ		3
 
 struct device;
 
 /**
  * struct nfp_net_tlv_caps - parsed control BAR TLV capabilities
+ * @me_freq_mhz:	ME clock_freq (MHz)
  */
 struct nfp_net_tlv_caps {
+	u32 me_freq_mhz;
 };
 
 int nfp_net_tlv_caps_parse(struct device *dev, u8 __iomem *ctrl_mem,
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_main.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_main.c
@@ -208,12 +208,6 @@ nfp_net_pf_init_vnic(struct nfp_pf *pf,
 {
 	int err;
 
-	/* Get ME clock frequency from ctrl BAR
-	 * XXX for now frequency is hardcoded until we figure out how
-	 * to get the value from nfp-hwinfo into ctrl bar
-	 */
-	nn->me_freq_mhz = 1200;
-
 	err = nfp_net_init(nn);
 	if (err)
 		return err;
--- a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c
@@ -277,12 +277,6 @@ static int nfp_netvf_pci_probe(struct pc
 	}
 	nfp_net_irqs_assign(nn, vf->irq_entries, num_irqs);
 
-	/* Get ME clock frequency from ctrl BAR
-	 * XXX for now frequency is hardcoded until we figure out how
-	 * to get the value from nfp-hwinfo into ctrl bar
-	 */
-	nn->me_freq_mhz = 1200;
-
 	err = nfp_net_init(nn);
 	if (err)
 		goto err_irqs_disable;