From: Michal Kalderon <Michal.Kalderon@cavium.com>
Date: Sun, 24 Sep 2017 12:09:42 +0300
Subject: qed: Add iWARP enablement support
Patch-mainline: v4.15-rc1
Git-commit: e0a8f9de16fce34fc2957eca4c71d3ff2ac286d5
References: bsc#1050536 FATE#322898 bsc#1050545 FATE#322893
This patch is the last of the initial iWARP patch series. It
adds the possiblity to actually detect iWARP from the device and enable
it in the critical locations which basically make iWARP available.
It wasn't submitted until now as iWARP hadn't been accepted into
the rdma tree.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 6 ++++++
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 8 ++++----
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 5 ++++-
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 1 +
4 files changed, 15 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -2069,6 +2069,12 @@ static void qed_rdma_set_pf_params(struc
num_srqs = min_t(u32, 32 * 1024, p_params->num_srqs);
+ if (p_hwfn->mcp_info->func_info.protocol == QED_PCI_ETH_RDMA) {
+ DP_NOTICE(p_hwfn,
+ "Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only\n");
+ p_hwfn->hw_info.personality = QED_PCI_ETH_ROCE;
+ }
+
switch (p_hwfn->hw_info.personality) {
case QED_PCI_ETH_IWARP:
/* Each QP requires one connection */
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1691,12 +1691,12 @@ qed_mcp_get_shmem_proto_mfw(struct qed_h
case FW_MB_PARAM_GET_PF_RDMA_ROCE:
*p_proto = QED_PCI_ETH_ROCE;
break;
+ case FW_MB_PARAM_GET_PF_RDMA_IWARP:
+ *p_proto = QED_PCI_ETH_IWARP;
+ break;
case FW_MB_PARAM_GET_PF_RDMA_BOTH:
- DP_NOTICE(p_hwfn,
- "Current day drivers don't support RoCE & iWARP. Default to RoCE-only\n");
- *p_proto = QED_PCI_ETH_ROCE;
+ *p_proto = QED_PCI_ETH_RDMA;
break;
- case FW_MB_PARAM_GET_PF_RDMA_IWARP:
default:
DP_NOTICE(p_hwfn,
"MFW answers GET_PF_RDMA_PROTOCOL but param is %08x\n",
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -156,7 +156,10 @@ static int qed_rdma_alloc(struct qed_hwf
return rc;
p_hwfn->p_rdma_info = p_rdma_info;
- p_rdma_info->proto = PROTOCOLID_ROCE;
+ if (QED_IS_IWARP_PERSONALITY(p_hwfn))
+ p_rdma_info->proto = PROTOCOLID_IWARP;
+ else
+ p_rdma_info->proto = PROTOCOLID_ROCE;
num_cons = qed_cxt_get_proto_cid_count(p_hwfn, p_rdma_info->proto,
NULL);
--- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
@@ -377,6 +377,7 @@ int qed_sp_pf_start(struct qed_hwfn *p_h
p_ramrod->personality = PERSONALITY_ISCSI;
break;
case QED_PCI_ETH_ROCE:
+ case QED_PCI_ETH_IWARP:
p_ramrod->personality = PERSONALITY_RDMA_AND_ETH;
break;
default: