From: Hannes Reinecke <hare@suse.de>
Date: Fri, 30 Jun 2017 19:18:09 +0200
Subject: [PATCH] scsi: aacraid: use aac_tmf_callback for reset fib
References: bsc#1049519,FATE#322889
Git-commit: 0d643ff3c35351a42d3f6b1e047302afdaa02d55
Patch-Mainline: v4.14-rc1
When sending a reset fib we shouldn't rely on the scsi command,
but rather set the TMF status in the map_info->reset_state variable.
That allows us to send a TMF independent on a scsi command.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/aacraid/linit.c | 99 +++++++++++++++++++++++++++++++++-----------
1 file changed, 74 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 57b2077..e5d2d91 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -814,8 +814,8 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
return ret;
}
-static u8 aac_eh_tmf_lun_reset_fib(struct aac_dev *aac, struct fib *fib,
- int bus, int cid, u64 tmf_lun)
+static u8 aac_eh_tmf_lun_reset_fib(struct aac_hba_map_info *info,
+ struct fib *fib, u64 tmf_lun)
{
struct aac_hba_tm_req *tmf;
u64 address;
@@ -824,7 +824,7 @@ static u8 aac_eh_tmf_lun_reset_fib(struct aac_dev *aac, struct fib *fib,
tmf = (struct aac_hba_tm_req *)fib->hw_fib_va;
memset(tmf, 0, sizeof(*tmf));
tmf->tmf = HBA_TMF_LUN_RESET;
- tmf->it_nexus = aac->hba_map[bus][cid].rmw_nexus;
+ tmf->it_nexus = info->rmw_nexus;
int_to_scsilun(tmf_lun, (struct scsi_lun *)tmf->lun);
address = (u64)fib->hw_error_pa;
@@ -838,8 +838,8 @@ static u8 aac_eh_tmf_lun_reset_fib(struct aac_dev *aac, struct fib *fib,
return HBA_IU_TYPE_SCSI_TM_REQ;
}
-static u8 aac_eh_tmf_hard_reset_fib(struct aac_dev *aac, struct fib *fib,
- int bus, int cid)
+static u8 aac_eh_tmf_hard_reset_fib(struct aac_hba_map_info *info,
+ struct fib *fib)
{
struct aac_hba_reset_req *rst;
u64 address;
@@ -847,8 +847,7 @@ static u8 aac_eh_tmf_hard_reset_fib(struct aac_dev *aac, struct fib *fib,
/* already tried, start a hard reset now */
rst = (struct aac_hba_reset_req *)fib->hw_fib_va;
memset(rst, 0, sizeof(*rst));
- /* reset_type is already zero... */
- rst->it_nexus = aac->hba_map[bus][cid].rmw_nexus;
+ rst->it_nexus = info->rmw_nexus;
address = (u64)fib->hw_error_pa;
rst->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
@@ -860,6 +859,33 @@ static u8 aac_eh_tmf_hard_reset_fib(struct aac_dev *aac, struct fib *fib,
return HBA_IU_TYPE_SATA_REQ;
}
+void aac_tmf_callback(void *context, struct fib *fibptr)
+{
+ struct aac_hba_resp *err =
+ &((struct aac_native_hba *)fibptr->hw_fib_va)->resp.err;
+ struct aac_hba_map_info *info = context;
+ int res;
+
+ switch (err->service_response) {
+ case HBA_RESP_SVCRES_TMF_REJECTED:
+ res = -1;
+ break;
+ case HBA_RESP_SVCRES_TMF_LUN_INVALID:
+ res = 0;
+ break;
+ case HBA_RESP_SVCRES_TMF_COMPLETE:
+ case HBA_RESP_SVCRES_TMF_SUCCEEDED:
+ res = 0;
+ break;
+ default:
+ res = -2;
+ break;
+ }
+ aac_fib_complete(fibptr);
+
+ info->reset_state = res;
+}
+
/*
* aac_eh_dev_reset - Device reset command handling
* @scsi_cmd: SCSI command block causing the reset
@@ -870,6 +896,7 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
struct scsi_device * dev = cmd->device;
struct Scsi_Host * host = dev->host;
struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ struct aac_hba_map_info *info;
int count;
u32 bus, cid;
struct fib *fib;
@@ -879,8 +906,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
bus = aac_logical_to_phys(scmd_channel(cmd));
cid = scmd_id(cmd);
+ info = &aac->hba_map[bus][cid];
if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
- aac->hba_map[bus][cid].devtype != AAC_DEVTYPE_NATIVE_RAW)
+ info->devtype != AAC_DEVTYPE_NATIVE_RAW)
+ return FAILED;
+
+ if (info->reset_state > 0)
return FAILED;
pr_err("%s: Host adapter reset request. SCSI hang ?\n",
@@ -890,21 +921,19 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
if (!fib)
return ret;
-
/* start a HBA_TMF_LUN_RESET TMF request */
- command = aac_eh_tmf_lun_reset_fib(aac, fib, bus, cid,
- cmd->device->lun);
+ command = aac_eh_tmf_lun_reset_fib(info, fib, dev->lun);
- cmd->SCp.sent_command = 0;
+ info->reset_state = 1;
status = aac_hba_send(command, fib,
- (fib_callback) aac_hba_callback,
- (void *) cmd);
+ (fib_callback) aac_tmf_callback,
+ (void *) info);
/* Wait up to 15 seconds for completion */
for (count = 0; count < 15; ++count) {
- if (cmd->SCp.sent_command) {
- ret = SUCCESS;
+ if (info->reset_state == 0) {
+ ret = info->reset_state == 0 ? SUCCESS : FAILED;
break;
}
msleep(1000);
@@ -923,6 +952,7 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
struct scsi_device * dev = cmd->device;
struct Scsi_Host * host = dev->host;
struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ struct aac_hba_map_info *info;
int count;
u32 bus, cid;
int ret = FAILED;
@@ -932,8 +962,12 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
bus = aac_logical_to_phys(scmd_channel(cmd));
cid = scmd_id(cmd);
+ info = &aac->hba_map[bus][cid];
if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
- aac->hba_map[bus][cid].devtype != AAC_DEVTYPE_NATIVE_RAW)
+ info->devtype != AAC_DEVTYPE_NATIVE_RAW)
+ return FAILED;
+
+ if (info->reset_state > 0)
return FAILED;
pr_err("%s: Host adapter reset request. SCSI hang ?\n",
@@ -945,18 +979,18 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
/* already tried, start a hard reset now */
- command = aac_eh_tmf_hard_reset_fib(aac, fib, bus, cid);
+ command = aac_eh_tmf_hard_reset_fib(info, fib);
- cmd->SCp.sent_command = 0;
+ info->reset_state = 2;
status = aac_hba_send(command, fib,
- (fib_callback) aac_hba_callback,
- (void *) cmd);
+ (fib_callback) aac_tmf_callback,
+ (void *) info);
/* Wait up to 15 seconds for completion */
for (count = 0; count < 15; ++count) {
- if (cmd->SCp.sent_command) {
- ret = SUCCESS;
+ if (info->reset_state <= 0) {
+ ret = info->reset_state == 0 ? SUCCESS : FAILED;
break;
}
msleep(1000);
@@ -1044,8 +1078,23 @@ int aac_eh_host_reset(struct scsi_cmnd *cmd)
&& aac_check_reset
&& (aac_check_reset != -1 || !is_ignore_reset)) {
/* Bypass wait for command quiesce */
- aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET);
- ret = SUCCESS;
+ if (aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET) == 0)
+ ret = SUCCESS;
+ }
+ /*
+ * Reset EH state
+ */
+ if (ret == SUCCESS) {
+ int bus, cid;
+ struct aac_hba_map_info *info;
+
+ for (bus = 0; bus < AAC_MAX_BUSES; bus++) {
+ for (cid = 0; cid < AAC_MAX_TARGETS; cid++) {
+ info = &aac->hba_map[bus][cid];
+ if (info->devtype == AAC_DEVTYPE_NATIVE_RAW)
+ info->reset_state = 0;
+ }
+ }
}
return ret;
}
--
1.8.5.6