From: James Smart <jsmart2021@gmail.com>
Date: Thu, 29 Nov 2018 16:09:33 -0800
Subject: [PATCH] scsi: lpfc: Cap NPIV vports to 256
Git-commit: 8b47ae69e049ae0b3373859d901f0334322f9fe9
Patch-mainline: v5.0-rc1
References: bsc#1118215
Depending on the chipset, the number of NPIV vports may vary and be in
excess of what most switches support (256). To avoid confusion with the
users, limit the reported NPIV vports to 256.
Additionally correct the 16G adapter which is reporting a bogus NPIV vport
number if the link is down.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/lpfc/lpfc.h | 3 ++-
drivers/scsi/lpfc/lpfc_attr.c | 12 ++++++++++--
drivers/scsi/lpfc/lpfc_init.c | 3 +++
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index b37e0caf0781..35dcd6958fd0 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1004,7 +1004,8 @@ struct lpfc_hba {
spinlock_t port_list_lock; /* lock for port_list mutations */
struct lpfc_vport *pport; /* physical lpfc_vport pointer */
uint16_t max_vpi; /* Maximum virtual nports */
-#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */
+#define LPFC_MAX_VPI 0xFF /* Max number VPI supported 0 - 0xff */
+#define LPFC_MAX_VPORTS 0x100 /* Max vports per port, with pport */
uint16_t max_vports; /*
* For IOV HBAs max_vpi can change
* after a reset. max_vports is max
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 5f30e40bcc0a..feaaa015150e 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1720,6 +1720,9 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ?
(bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0;
+ /* Limit the max we support */
+ if (max_vpi > LPFC_MAX_VPI)
+ max_vpi = LPFC_MAX_VPI;
if (mvpi)
*mvpi = max_vpi;
if (avpi)
@@ -1735,8 +1738,13 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
*axri = pmb->un.varRdConfig.avail_xri;
if (mvpi)
*mvpi = pmb->un.varRdConfig.max_vpi;
- if (avpi)
- *avpi = pmb->un.varRdConfig.avail_vpi;
+ if (avpi) {
+ /* avail_vpi is only valid if link is up and ready */
+ if (phba->link_state == LPFC_HBA_READY)
+ *avpi = pmb->un.varRdConfig.avail_vpi;
+ else
+ *avpi = pmb->un.varRdConfig.max_vpi;
+ }
}
mempool_free(pmboxq, phba->mbox_mem_pool);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 647a037d6f4d..716add289397 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7958,6 +7958,9 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
phba->sli4_hba.max_cfg_param.max_vpi =
bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ /* Limit the max we support */
+ if (phba->sli4_hba.max_cfg_param.max_vpi > LPFC_MAX_VPORTS)
+ phba->sli4_hba.max_cfg_param.max_vpi = LPFC_MAX_VPORTS;
phba->sli4_hba.max_cfg_param.vpi_base =
bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_rpi =
--
2.16.4