From: James Smart <jsmart2021@gmail.com>
Date: Mon, 5 Mar 2018 12:04:02 -0800
Subject: [PATCH] scsi: lpfc: Fix NVME Initiator FirstBurst
Git-commit: 0709263abe0de70a798dcdf481d5dd489ca4752e
Patch-mainline: v4.17-rc1
References: bsc#1118139
First Burst support was not properly indicated in NVMe PRLI.
Correct the bit position and the logic to check and set first burst support.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 15 ++++++++++++++-
drivers/scsi/lpfc/lpfc_nvme.h | 2 ++
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index b63179d895e2..022060636ae1 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1998,8 +1998,14 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_type |= NLP_NVME_TARGET;
if (bf_get_be32(prli_disc, nvpr))
ndlp->nlp_type |= NLP_NVME_DISCOVERY;
+
+ /*
+ * If prli_fba is set, the Target supports FirstBurst.
+ * If prli_fb_sz is 0, the FirstBurst size is unlimited,
+ * otherwise it defines the actual size supported by
+ * the NVME Target.
+ */
if ((bf_get_be32(prli_fba, nvpr) == 1) &&
- (bf_get_be32(prli_fb_sz, nvpr) > 0) &&
(phba->cfg_nvme_enable_fb) &&
(!phba->nvmet_support)) {
/* Both sides support FB. The target's first
@@ -2008,6 +2014,13 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_flag |= NLP_FIRSTBURST;
ndlp->nvme_fb_size = bf_get_be32(prli_fb_sz,
nvpr);
+
+ /* Expressed in units of 512 bytes */
+ if (ndlp->nvme_fb_size)
+ ndlp->nvme_fb_size <<=
+ LPFC_NVME_FB_SHIFT;
+ else
+ ndlp->nvme_fb_size = LPFC_NVME_MAX_FB;
}
}
diff --git a/drivers/scsi/lpfc/lpfc_nvme.h b/drivers/scsi/lpfc/lpfc_nvme.h
index e79f8f75758c..48b0229ebc99 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.h
+++ b/drivers/scsi/lpfc/lpfc_nvme.h
@@ -27,6 +27,8 @@
#define LPFC_NVME_WAIT_TMO 10
#define LPFC_NVME_EXPEDITE_XRICNT 8
+#define LPFC_NVME_FB_SHIFT 9
+#define LPFC_NVME_MAX_FB (1 << 20) /* 1M */
struct lpfc_nvme_qhandle {
uint32_t index; /* WQ index to use */
--
2.12.3