From: Aya Levin <ayal@nvidia.com>
Date: Mon, 13 Sep 2021 16:49:47 +0300
Subject: net/mlx5e: Mutually exclude setting of TX-port-TS and MQPRIO in
channel mode
Patch-mainline: v5.15-rc5
Git-commit: 3bf1742f3c69501dec300b55917b9352428cb4dd
References: jsc#SLE-19253
TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This
conflicts with MQPRIO in channel mode, which specifies explicitly which
TC accepts the packet. This patch mutually excludes the above
configuration.
Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 11 +++++++++++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++++++++
2 files changed, 19 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -2036,6 +2036,17 @@ static int set_pflag_tx_port_ts(struct n
}
new_params = priv->channels.params;
+ /* Don't allow enabling TX-port-TS if MQPRIO mode channel offload is
+ * active, since it defines explicitly which TC accepts the packet.
+ * This conflicts with TX-port-TS hijacking the PTP traffic to a specific
+ * HW TX-queue.
+ */
+ if (enable && new_params.mqprio.mode == TC_MQPRIO_MODE_CHANNEL) {
+ netdev_err(priv->netdev,
+ "%s: MQPRIO mode channel offload is active, cannot set the TX-port-TS\n",
+ __func__);
+ return -EINVAL;
+ }
MLX5E_SET_PFLAG(&new_params, MLX5E_PFLAG_TX_PORT_TS, enable);
/* No need to verify SQ stop room as
* ptpsq.txqsq.stop_room <= generic_sq->stop_room, and both
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2945,9 +2945,17 @@ static int mlx5e_mqprio_channel_validate
struct tc_mqprio_qopt_offload *mqprio)
{
struct net_device *netdev = priv->netdev;
+ struct mlx5e_ptp *ptp_channel;
int agg_count = 0;
int i;
+ ptp_channel = priv->channels.ptp;
+ if (ptp_channel && test_bit(MLX5E_PTP_STATE_TX, ptp_channel->state)) {
+ netdev_err(netdev,
+ "Cannot activate MQPRIO mode channel since it conflicts with TX port TS\n");
+ return -EINVAL;
+ }
+
if (mqprio->qopt.offset[0] != 0 || mqprio->qopt.num_tc < 1 ||
mqprio->qopt.num_tc > MLX5E_MAX_NUM_MQPRIO_CH_TC)
return -EINVAL;