From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 7 Dec 2022 12:53:25 +0100
Subject: drm/vc4: hdmi: Correct interlaced timings again
Git-commit: 771d6539f27bd55f43d8a95d53a7eeaaffa2681c
Patch-mainline: v6.3-rc1
References: git-fixes
The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.
Fixes: fb10dc451c0f ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index dfb7f41b28df..14628864487a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1307,11 +1307,12 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL));
u32 vertb = (VC4_SET_FIELD(mode->htotal >> (2 - pixel_rep),
VC5_HDMI_VERTB_VSPO) |
- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+ interlaced,
VC4_HDMI_VERTB_VBP));
u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
VC4_SET_FIELD(mode->crtc_vtotal -
- mode->crtc_vsync_end - interlaced,
+ mode->crtc_vsync_end,
VC4_HDMI_VERTB_VBP));
unsigned long flags;
unsigned char gcp;
--
2.35.3