From: Quinn Tran <qutran@marvell.com>
Date: Wed, 23 Jun 2021 22:26:01 -0700
Subject: scsi: qla2xxx: edif: Add authentication pass + fail bsgs
Patch-mainline: v5.15-rc1
Git-commit: 8a4bb2c1dd623b5a71609de5b04ef3b5086b0a3e
References: bsc#1189392

Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.

On completion of the authentication process, the authentication application
will notify driver on whether it is successful or not.

In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to
tell driver to proceed to the PRLI phase.

In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call
to tell driver to tear down the connection and retry. In the case where an
existing session is active, the re-key process can fail. The session tear
down ensures data is not further compromised.

Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Daniel Wagner <dwagner@suse.de>
---
 drivers/scsi/qla2xxx/qla_edif.c |  213 ++++++++++++++++++++++++++++++++++++++--
 drivers/scsi/qla2xxx/qla_gbl.h  |    1 
 drivers/scsi/qla2xxx/qla_init.c |    3 
 3 files changed, 209 insertions(+), 8 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -656,6 +656,204 @@ qla_edif_app_stop(scsi_qla_host_t *vha,
 	return rval;
 }
 
+static int
+qla_edif_app_chk_sa_update(scsi_qla_host_t *vha, fc_port_t *fcport,
+		struct app_plogi_reply *appplogireply)
+{
+	int	ret = 0;
+
+	if (!(fcport->edif.rx_sa_set && fcport->edif.tx_sa_set)) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s: wwpn %8phC Both SA indexes has not been SET TX %d, RX %d.\n",
+		    __func__, fcport->port_name, fcport->edif.tx_sa_set,
+		    fcport->edif.rx_sa_set);
+		appplogireply->prli_status = 0;
+		ret = 1;
+	} else  {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s wwpn %8phC Both SA(s) updated.\n", __func__,
+		    fcport->port_name);
+		fcport->edif.rx_sa_set = fcport->edif.tx_sa_set = 0;
+		fcport->edif.rx_sa_pending = fcport->edif.tx_sa_pending = 0;
+		appplogireply->prli_status = 1;
+	}
+	return ret;
+}
+
+/**
+ * qla_edif_app_authok - authentication by app succeeded.  Driver can proceed
+ *   with prli
+ * @vha: host adapter pointer
+ * @bsg_job: user request
+ */
+static int
+qla_edif_app_authok(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
+{
+	int32_t			rval = 0;
+	struct auth_complete_cmd appplogiok;
+	struct app_plogi_reply	appplogireply = {0};
+	struct fc_bsg_reply	*bsg_reply = bsg_job->reply;
+	fc_port_t		*fcport = NULL;
+	port_id_t		portid = {0};
+
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, &appplogiok,
+	    sizeof(struct auth_complete_cmd));
+
+	switch (appplogiok.type) {
+	case PL_TYPE_WWPN:
+		fcport = qla2x00_find_fcport_by_wwpn(vha,
+		    appplogiok.u.wwpn, 0);
+		if (!fcport)
+			ql_dbg(ql_dbg_edif, vha, 0x911d,
+			    "%s wwpn lookup failed: %8phC\n",
+			    __func__, appplogiok.u.wwpn);
+		break;
+	case PL_TYPE_DID:
+		fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
+		if (!fcport)
+			ql_dbg(ql_dbg_edif, vha, 0x911d,
+			    "%s d_id lookup failed: %x\n", __func__,
+			    portid.b24);
+		break;
+	default:
+		ql_dbg(ql_dbg_edif, vha, 0x911d,
+		    "%s undefined type: %x\n", __func__,
+		    appplogiok.type);
+		break;
+	}
+
+	if (!fcport) {
+		SET_DID_STATUS(bsg_reply->result, DID_ERROR);
+		goto errstate_exit;
+	}
+
+	/*
+	 * if port is online then this is a REKEY operation
+	 * Only do sa update checking
+	 */
+	if (atomic_read(&fcport->state) == FCS_ONLINE) {
+		ql_dbg(ql_dbg_edif, vha, 0x911d,
+		    "%s Skipping PRLI complete based on rekey\n", __func__);
+		appplogireply.prli_status = 1;
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		qla_edif_app_chk_sa_update(vha, fcport, &appplogireply);
+		goto errstate_exit;
+	}
+
+	/* make sure in AUTH_PENDING or else reject */
+	if (fcport->disc_state != DSC_LOGIN_AUTH_PEND) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s wwpn %8phC is not in auth pending state (%x)\n",
+		    __func__, fcport->port_name, fcport->disc_state);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		appplogireply.prli_status = 0;
+		goto errstate_exit;
+	}
+
+	SET_DID_STATUS(bsg_reply->result, DID_OK);
+	appplogireply.prli_status = 1;
+	if (!(fcport->edif.rx_sa_set && fcport->edif.tx_sa_set)) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s: wwpn %8phC Both SA indexes has not been SET TX %d, RX %d.\n",
+		    __func__, fcport->port_name, fcport->edif.tx_sa_set,
+		    fcport->edif.rx_sa_set);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		appplogireply.prli_status = 0;
+		goto errstate_exit;
+
+	} else {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s wwpn %8phC Both SA(s) updated.\n", __func__,
+		    fcport->port_name);
+		fcport->edif.rx_sa_set = fcport->edif.tx_sa_set = 0;
+		fcport->edif.rx_sa_pending = fcport->edif.tx_sa_pending = 0;
+	}
+
+	if (qla_ini_mode_enabled(vha)) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s AUTH complete - RESUME with prli for wwpn %8phC\n",
+		    __func__, fcport->port_name);
+		qla_edif_reset_auth_wait(fcport, DSC_LOGIN_PEND, 1);
+		qla24xx_post_prli_work(vha, fcport);
+	}
+
+errstate_exit:
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+	sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+	    bsg_job->reply_payload.sg_cnt, &appplogireply,
+	    sizeof(struct app_plogi_reply));
+
+	return rval;
+}
+
+/**
+ * qla_edif_app_authfail - authentication by app has failed.  Driver is given
+ *   notice to tear down current session.
+ * @vha: host adapter pointer
+ * @bsg_job: user request
+ */
+static int
+qla_edif_app_authfail(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
+{
+	int32_t			rval = 0;
+	struct auth_complete_cmd appplogifail;
+	struct fc_bsg_reply	*bsg_reply = bsg_job->reply;
+	fc_port_t		*fcport = NULL;
+	port_id_t		portid = {0};
+
+	ql_dbg(ql_dbg_edif, vha, 0x911d, "%s app auth fail\n", __func__);
+
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, &appplogifail,
+	    sizeof(struct auth_complete_cmd));
+
+	/*
+	 * TODO: edif: app has failed this plogi. Inform driver to
+	 * take any action (if any).
+	 */
+	switch (appplogifail.type) {
+	case PL_TYPE_WWPN:
+		fcport = qla2x00_find_fcport_by_wwpn(vha,
+		    appplogifail.u.wwpn, 0);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		break;
+	case PL_TYPE_DID:
+		fcport = qla2x00_find_fcport_by_pid(vha, &appplogifail.u.d_id);
+		if (!fcport)
+			ql_dbg(ql_dbg_edif, vha, 0x911d,
+			    "%s d_id lookup failed: %x\n", __func__,
+			    portid.b24);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		break;
+	default:
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s undefined type: %x\n", __func__,
+		    appplogifail.type);
+		bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+		SET_DID_STATUS(bsg_reply->result, DID_ERROR);
+		rval = -1;
+		break;
+	}
+
+	ql_dbg(ql_dbg_edif, vha, 0x911d,
+	    "%s fcport is 0x%p\n", __func__, fcport);
+
+	if (fcport) {
+		/* set/reset edif values and flags */
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s reset the auth process - %8phC, loopid=%x portid=%06x.\n",
+		    __func__, fcport->port_name, fcport->loop_id, fcport->d_id.b24);
+
+		if (qla_ini_mode_enabled(fcport->vha)) {
+			fcport->send_els_logo = 1;
+			qla_edif_reset_auth_wait(fcport, DSC_LOGIN_PEND, 0);
+		}
+	}
+
+	return rval;
+}
+
 /**
  * qla_edif_app_getfcinfo - app would like to read session info (wwpn, nportid,
  *   [initiator|target] mode.  It can specific session with specific nport id or
@@ -697,8 +895,7 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *
 			tdid = app_req.remote_pid;
 
 			ql_dbg(ql_dbg_edif, vha, 0x2058,
-			    "APP request entry - portid=%06x.\n",
-			    tdid.b24);
+			    "APP request entry - portid=%06x.\n", tdid.b24);
 
 			/* Ran out of space */
 			if (pcnt > app_req.num_ports)
@@ -719,10 +916,8 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *
 			app_reply->ports[pcnt].remote_pid = fcport->d_id;
 
 			ql_dbg(ql_dbg_edif, vha, 0x2058,
-			    "Found FC_SP fcport - nn %8phN pn %8phN pcnt %d portid=%02x%02x%02x.\n",
-			    fcport->node_name, fcport->port_name, pcnt,
-			    fcport->d_id.b.domain, fcport->d_id.b.area,
-			    fcport->d_id.b.al_pa);
+			    "Found FC_SP fcport - nn %8phN pn %8phN pcnt %d portid=%06x\n",
+			    fcport->node_name, fcport->port_name, pcnt, fcport->d_id.b24);
 
 			switch (fcport->edif.auth_state) {
 			case VND_CMD_AUTH_STATE_ELS_RCVD:
@@ -888,6 +1083,12 @@ qla_edif_app_mgmt(struct bsg_job *bsg_jo
 	case QL_VND_SC_APP_STOP:
 		rval = qla_edif_app_stop(vha, bsg_job);
 		break;
+	case QL_VND_SC_AUTH_OK:
+		rval = qla_edif_app_authok(vha, bsg_job);
+		break;
+	case QL_VND_SC_AUTH_FAIL:
+		rval = qla_edif_app_authfail(vha, bsg_job);
+		break;
 	case QL_VND_SC_GET_FCINFO:
 		rval = qla_edif_app_getfcinfo(vha, bsg_job);
 		break;
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -13,6 +13,7 @@
  * Global Function Prototypes in qla_init.c source file.
  */
 extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
+extern int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport);
 
 extern int qla2100_pci_config(struct scsi_qla_host *);
 extern int qla2300_pci_config(struct scsi_qla_host *);
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -35,7 +35,6 @@ static int qla2x00_restart_isp(scsi_qla_
 static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
 static int qla84xx_init_chip(scsi_qla_host_t *);
 static int qla25xx_init_queues(struct qla_hw_data *);
-static int qla24xx_post_prli_work(struct scsi_qla_host*, fc_port_t *);
 static void qla24xx_handle_gpdb_event(scsi_qla_host_t *vha,
 				      struct event_arg *ea);
 static void qla24xx_handle_prli_done_event(struct scsi_qla_host *,
@@ -1194,7 +1193,7 @@ static void qla24xx_async_gpdb_sp_done(s
 	sp->free(sp);
 }
 
-static int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport)
+int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport)
 {
 	struct qla_work_evt *e;