From: Giridhar Malavali <gmalavali@marvell.com>
Date: Wed, 26 Feb 2020 14:40:07 -0800
Subject: scsi: qla2xxx: Use FC generic update firmware options routine for
 ISP27xx
Patch-mainline: v5.7-rc1
Git-commit: 37efd51f75f30b48c2d19ee94eeccfd4325c3cb4
References: bsc#1157424

This patch uses generic firmware update options for FCoE based
adapters as well to reduce code duplication.

Link: https://lore.kernel.org/r/20200226224022.24518-4-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Daniel Wagner <dwagner@suse.de>
---
 drivers/scsi/qla2xxx/qla_gbl.h  |    2 -
 drivers/scsi/qla2xxx/qla_init.c |   66 ----------------------------------------
 drivers/scsi/qla2xxx/qla_os.c   |    4 +-
 3 files changed, 2 insertions(+), 70 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -31,8 +31,6 @@ extern int qla24xx_nvram_config(struct s
 extern int qla81xx_nvram_config(struct scsi_qla_host *);
 extern void qla2x00_update_fw_options(struct scsi_qla_host *);
 extern void qla24xx_update_fw_options(scsi_qla_host_t *);
-extern void qla81xx_update_fw_options(scsi_qla_host_t *);
-extern void qla83xx_update_fw_options(scsi_qla_host_t *);
 
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -8679,72 +8679,6 @@ qla82xx_restart_isp(scsi_qla_host_t *vha
 	return status;
 }
 
-void
-qla83xx_update_fw_options(scsi_qla_host_t *vha)
-{
-	struct qla_hw_data *ha = vha->hw;
-
-	if (ql2xrdpenable)
-		ha->fw_options[1] |= ADD_FO1_ENABLE_PUREX_IOCB;
-
-	qla2x00_set_fw_options(vha, ha->fw_options);
-}
-
-void
-qla81xx_update_fw_options(scsi_qla_host_t *vha)
-{
-	struct qla_hw_data *ha = vha->hw;
-
-	/*  Hold status IOCBs until ABTS response received. */
-	if (ql2xfwholdabts)
-		ha->fw_options[3] |= BIT_12;
-
-	/* Set Retry FLOGI in case of P2P connection */
-	if (ha->operating_mode == P2P) {
-		ha->fw_options[2] |= BIT_3;
-		ql_dbg(ql_dbg_disc, vha, 0x2103,
-		    "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n",
-			__func__, ha->fw_options[2]);
-	}
-
-	/* Move PUREX, ABTS RX & RIDA to ATIOQ */
-	if (ql2xmvasynctoatio) {
-		if (qla_tgt_mode_enabled(vha) ||
-		    qla_dual_mode_enabled(vha))
-			ha->fw_options[2] |= BIT_11;
-		else
-			ha->fw_options[2] &= ~BIT_11;
-	}
-
-	if (qla_tgt_mode_enabled(vha) ||
-	    qla_dual_mode_enabled(vha)) {
-		/* FW auto send SCSI status during */
-		ha->fw_options[1] |= BIT_8;
-		ha->fw_options[10] |= (u16)SAM_STAT_BUSY << 8;
-
-		/* FW perform Exchange validation */
-		ha->fw_options[2] |= BIT_4;
-	} else {
-		ha->fw_options[1]  &= ~BIT_8;
-		ha->fw_options[10] &= 0x00ff;
-
-		ha->fw_options[2] &= ~BIT_4;
-	}
-
-	if (ql2xetsenable) {
-		/* Enable ETS Burst. */
-		memset(ha->fw_options, 0, sizeof(ha->fw_options));
-		ha->fw_options[2] |= BIT_9;
-	}
-
-	ql_dbg(ql_dbg_init, vha, 0x00e9,
-	    "%s, add FW options 1-3 = 0x%04x 0x%04x 0x%04x mode %x\n",
-	    __func__, ha->fw_options[1], ha->fw_options[2],
-	    ha->fw_options[3], vha->host->active_mode);
-
-	qla2x00_set_fw_options(vha, ha->fw_options);
-}
-
 /*
  * qla24xx_get_fcp_prio
  *	Gets the fcp cmd priority value for the logged in port.
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2314,7 +2314,7 @@ static struct isp_operations qla81xx_isp
 	.config_rings		= qla24xx_config_rings,
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
-	.update_fw_options	= qla83xx_update_fw_options,
+	.update_fw_options	= qla24xx_update_fw_options,
 	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,
@@ -2431,7 +2431,7 @@ static struct isp_operations qla83xx_isp
 	.config_rings		= qla24xx_config_rings,
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
-	.update_fw_options	= qla83xx_update_fw_options,
+	.update_fw_options	= qla24xx_update_fw_options,
 	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,