From 530f7bda3e275d0195b33a3208767295583b5e02 Mon Sep 17 00:00:00 2001
From: Baruch Siach <baruch@tkos.co.il>
Date: Sun, 26 Apr 2020 09:22:06 +0300
Subject: [PATCH 1/9] net: phy: marvell10g: fix temperature sensor on 2110
Git-commit: c3e302edca2457bbd0c958c445a7538fbf6a6ac8
Patch-mainline: v5.7-rc5
References: git-fixes
Read the temperature sensor register from the correct location for the
88E2110 PHY. There is no enable/disable bit on 2110, so make
mv3310_hwmon_config() run on 88X3310 only.
Fixes: 62d01535474b61 ("net: phy: marvell10g: add support for the 88x2110 PHY")
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
---
drivers/net/phy/marvell10g.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 1bf13017d288..9c8ac9188fbd 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -44,6 +44,9 @@ enum {
MV_PCS_PAIRSWAP_AB = 0x0002,
MV_PCS_PAIRSWAP_NONE = 0x0003,
+ /* Temperature read register (88E2110 only) */
+ MV_PCS_TEMP = 0x8042,
+
/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
* registers appear to set themselves to the 0x800X when AN is
* restarted, but status registers appear readable from either.
@@ -79,6 +82,24 @@ static umode_t mv3310_hwmon_is_visible(const void *data,
return 0;
}
+static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+}
+
+static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP);
+}
+
+static int mv10g_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ if (phydev->drv->phy_id == MARVELL_PHY_ID_88X3310)
+ return mv3310_hwmon_read_temp_reg(phydev);
+ else /* MARVELL_PHY_ID_88E2110 */
+ return mv2110_hwmon_read_temp_reg(phydev);
+}
+
static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *value)
{
@@ -91,7 +112,7 @@ static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
}
if (type == hwmon_temp && attr == hwmon_temp_input) {
- temp = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+ temp = mv10g_hwmon_read_temp_reg(phydev);
if (temp < 0)
return temp;
@@ -144,6 +165,9 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
u16 val;
int ret;
+ if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
+ return 0;
+
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP,
MV_V2_TEMP_UNKNOWN);
if (ret < 0)
--
2.16.4