From 7b188d6ba27a131e7934a51a14ece331c0491f18 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Date: Tue, 3 Sep 2019 17:11:38 -0300
Subject: [PATCH] media: ov6650: Fix crop rectangle alignment not passed back
Git-commit: 7b188d6ba27a131e7934a51a14ece331c0491f18
References: git-fixes
Patch-mainline: v5.5

Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const")
introduced a writable copy of constified user requested crop rectangle
in order to be able to perform hardware alignments on it.  Later
on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video
ops") replaced s_crop() video operation using that const argument with
set_selection() pad operation which had a corresponding argument not
constified, however the original behavior of the driver was not
restored.  Since that time, any hardware alignment applied on a user
requested crop rectangle is not passed back to the user calling
.set_selection() as it should be.

Fix the issue by dropping the copy and replacing all references to it
with references to the crop rectangle embedded in the user argument.

Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
---
 drivers/media/i2c/soc_camera/ov6650.c |   32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

--- a/drivers/media/i2c/soc_camera/ov6650.c
+++ b/drivers/media/i2c/soc_camera/ov6650.c
@@ -464,39 +464,37 @@ static int ov6650_set_selection(struct v
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov6650 *priv = to_ov6650(client);
-	struct v4l2_rect rect = sel->r;
 	int ret;
 
 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
 	    sel->target != V4L2_SEL_TGT_CROP)
 		return -EINVAL;
 
-	rect.left   = ALIGN(rect.left,   2);
-	rect.width  = ALIGN(rect.width,  2);
-	rect.top    = ALIGN(rect.top,    2);
-	rect.height = ALIGN(rect.height, 2);
-	soc_camera_limit_side(&rect.left, &rect.width,
-			DEF_HSTRT << 1, 2, W_CIF);
-	soc_camera_limit_side(&rect.top, &rect.height,
-			DEF_VSTRT << 1, 2, H_CIF);
+	v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1,
+			      &sel->r.height, 2, H_CIF, 1, 0);
+	v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1,
+			      (DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1,
+			      &sel->r.top, DEF_VSTRT << 1,
+			      (DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height,
+			      1, 0);
 
-	ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1);
+	ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
 	if (!ret) {
-		priv->rect.left = rect.left;
+		priv->rect.left = sel->r.left;
 		ret = ov6650_reg_write(client, REG_HSTOP,
-				(rect.left + rect.width) >> 1);
+				(sel->r.left + sel->r.width) >> 1);
 	}
 	if (!ret) {
-		priv->rect.width = rect.width;
-		ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1);
+		priv->rect.width = sel->r.width;
+		ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
 	}
 	if (!ret) {
-		priv->rect.top = rect.top;
+		priv->rect.top = sel->r.top;
 		ret = ov6650_reg_write(client, REG_VSTOP,
-				(rect.top + rect.height) >> 1);
+				(sel->r.top + sel->r.height) >> 1);
 	}
 	if (!ret)
-		priv->rect.height = rect.height;
+		priv->rect.height = sel->r.height;
 
 	return ret;
 }