From f2c575da7d7ca42e7bcbe506b9c8dfa17d61901b Mon Sep 17 00:00:00 2001
From: Douglas Anderson <dianders@chromium.org>
Date: Fri, 30 Jul 2021 08:46:04 -0700
Subject: Revert "drm/panel-simple: Support for delays between GPIO &
regulator"
Git-commit: 81c3212dd5fbd5274e673c4fb3bf60879d020b35
Patch-mainline: v5.15-rc1
References: jsc#PED-1166 jsc#PED-1168 jsc#PED-1170 jsc#PED-1218 jsc#PED-1220 jsc#PED-1222 jsc#PED-1223 jsc#PED-1225
This reverts commit 18a1488bf1e13fc3fc96d7948466b2166067c6c8.
Those delays were added to support the Samsung ATNA33XC20
panel. However, we've moving that to its own panel driver and out of
panel-simple. That means we don't need the ability to specify this
delay.
NOTE: it's unlikely we want to keep this delay "just in case" some
other panel needs it. The enable-gpio and the power supply are really
supposed to be different ways to specify the same thing: the main
enable of the panel. Supporting a delay between them doesn't really
make sense.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.5.Ie44e3e5b7a926392541d575ca84c56931596513f@changeid
Acked-by: Patrik Jakobsson <pjakobsson@suse.de>
---
drivers/gpu/drm/panel/panel-simple.c | 28 ----------------------------
1 file changed, 28 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 114c3eead6c2..d9acd1e847ca 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -132,22 +132,6 @@ struct panel_desc {
*/
unsigned int prepare_to_enable;
- /**
- * @delay.power_to_enable: Time for the power to enable the display on.
- *
- * The time (in milliseconds) to wait after powering up the display
- * before asserting its enable pin.
- */
- unsigned int power_to_enable;
-
- /**
- * @delay.disable_to_power_off: Time for the disable to power the display off.
- *
- * The time (in milliseconds) to wait before powering off the display
- * after deasserting its enable pin.
- */
- unsigned int disable_to_power_off;
-
/**
* @delay.enable: Time for the panel to display a valid frame.
*
@@ -363,10 +347,6 @@ static int panel_simple_suspend(struct device *dev)
struct panel_simple *p = dev_get_drvdata(dev);
gpiod_set_value_cansleep(p->enable_gpio, 0);
-
- if (p->desc->delay.disable_to_power_off)
- msleep(p->desc->delay.disable_to_power_off);
-
regulator_disable(p->supply);
p->unprepared_time = ktime_get();
@@ -427,9 +407,6 @@ static int panel_simple_prepare_once(struct panel_simple *p)
return err;
}
- if (p->desc->delay.power_to_enable)
- msleep(p->desc->delay.power_to_enable);
-
gpiod_set_value_cansleep(p->enable_gpio, 1);
delay = p->desc->delay.prepare;
@@ -803,11 +780,6 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
break;
}
- if (!panel->enable_gpio && desc->delay.disable_to_power_off)
- dev_warn(dev, "Need a delay after disabling panel GPIO, but a GPIO wasn't provided\n");
- if (!panel->enable_gpio && desc->delay.power_to_enable)
- dev_warn(dev, "Need a delay before enabling panel GPIO, but a GPIO wasn't provided\n");
-
dev_set_drvdata(dev, panel);
/*
--
2.38.1