From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Fri, 22 Apr 2022 12:58:16 -0700
Subject: Bluetooth: hci_event: Fix checking for invalid handle on error status
Patch-mainline: v5.18-rc5
Git-commit: c86cc5a3ec70f5644f1fa21610b943d0441bc1f7
References: jsc#PED-1407
Commit d5ebaa7c5f6f6 introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range int case of error status:
> HCI Event: Connect Complete (0x03) plen 11
Status: Page Timeout (0x04)
Handle: 65535
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle
Because of it is impossible to cleanup the connections properly since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
gateway SDP record: Connection timed out
> HCI Event: Command Complete (0x0e) plen 10
Create Connection Cancel (0x01|0x0008) ncmd 1
Status: Unknown Connection Identifier (0x02)
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
---
include/net/bluetooth/hci.h | 1
net/bluetooth/hci_event.c | 65 ++++++++++++++++++++++++--------------------
2 files changed, 37 insertions(+), 29 deletions(-)
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -578,6 +578,7 @@ enum {
#define HCI_ERROR_CONNECTION_TIMEOUT 0x08
#define HCI_ERROR_REJ_LIMITED_RESOURCES 0x0d
#define HCI_ERROR_REJ_BAD_ADDR 0x0f
+#define HCI_ERROR_INVALID_PARAMETERS 0x12
#define HCI_ERROR_REMOTE_USER_TERM 0x13
#define HCI_ERROR_REMOTE_LOW_RESOURCES 0x14
#define HCI_ERROR_REMOTE_POWER_OFF 0x15
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3067,13 +3067,9 @@ static void hci_conn_complete_evt(struct
{
struct hci_ev_conn_complete *ev = data;
struct hci_conn *conn;
+ u8 status = ev->status;
- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) {
- bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for invalid handle");
- return;
- }
-
- bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
+ bt_dev_dbg(hdev, "status 0x%2.2x", status);
hci_dev_lock(hdev);
@@ -3122,8 +3118,14 @@ static void hci_conn_complete_evt(struct
goto unlock;
}
- if (!ev->status) {
+ if (!status) {
conn->handle = __le16_to_cpu(ev->handle);
+ if (conn->handle > HCI_CONN_HANDLE_MAX) {
+ bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
+ conn->handle, HCI_CONN_HANDLE_MAX);
+ status = HCI_ERROR_INVALID_PARAMETERS;
+ goto done;
+ }
if (conn->type == ACL_LINK) {
conn->state = BT_CONFIG;
@@ -3164,18 +3166,18 @@ static void hci_conn_complete_evt(struct
hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp),
&cp);
}
- } else {
- conn->state = BT_CLOSED;
- if (conn->type == ACL_LINK)
- mgmt_connect_failed(hdev, &conn->dst, conn->type,
- conn->dst_type, ev->status);
}
if (conn->type == ACL_LINK)
hci_sco_setup(conn, ev->status);
- if (ev->status) {
- hci_connect_cfm(conn, ev->status);
+done:
+ if (status) {
+ conn->state = BT_CLOSED;
+ if (conn->type == ACL_LINK)
+ mgmt_connect_failed(hdev, &conn->dst, conn->type,
+ conn->dst_type, status);
+ hci_connect_cfm(conn, status);
hci_conn_del(conn);
} else if (ev->link_type == SCO_LINK) {
switch (conn->setting & SCO_AIRMODE_MASK) {
@@ -3185,7 +3187,7 @@ static void hci_conn_complete_evt(struct
break;
}
- hci_connect_cfm(conn, ev->status);
+ hci_connect_cfm(conn, status);
}
unlock:
@@ -4676,6 +4678,7 @@ static void hci_sync_conn_complete_evt(s
{
struct hci_ev_sync_conn_complete *ev = data;
struct hci_conn *conn;
+ u8 status = ev->status;
switch (ev->link_type) {
case SCO_LINK:
@@ -4690,12 +4693,7 @@ static void hci_sync_conn_complete_evt(s
return;
}
- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) {
- bt_dev_err(hdev, "Ignoring HCI_Sync_Conn_Complete for invalid handle");
- return;
- }
-
- bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
+ bt_dev_dbg(hdev, "status 0x%2.2x", status);
hci_dev_lock(hdev);
@@ -4729,9 +4727,17 @@ static void hci_sync_conn_complete_evt(s
goto unlock;
}
- switch (ev->status) {
+ switch (status) {
case 0x00:
conn->handle = __le16_to_cpu(ev->handle);
+ if (conn->handle > HCI_CONN_HANDLE_MAX) {
+ bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
+ conn->handle, HCI_CONN_HANDLE_MAX);
+ status = HCI_ERROR_INVALID_PARAMETERS;
+ conn->state = BT_CLOSED;
+ break;
+ }
+
conn->state = BT_CONNECTED;
conn->type = ev->link_type;
@@ -4775,8 +4781,8 @@ static void hci_sync_conn_complete_evt(s
}
}
- hci_connect_cfm(conn, ev->status);
- if (ev->status)
+ hci_connect_cfm(conn, status);
+ if (status)
hci_conn_del(conn);
unlock:
@@ -5527,11 +5533,6 @@ static void le_conn_complete_evt(struct
struct smp_irk *irk;
u8 addr_type;
- if (handle > HCI_CONN_HANDLE_MAX) {
- bt_dev_err(hdev, "Ignoring HCI_LE_Connection_Complete for invalid handle");
- return;
- }
-
hci_dev_lock(hdev);
/* All controllers implicitly stop advertising in the event of a
@@ -5603,6 +5604,12 @@ static void le_conn_complete_evt(struct
conn->dst_type = ev_bdaddr_type(hdev, conn->dst_type, NULL);
+ if (handle > HCI_CONN_HANDLE_MAX) {
+ bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x", handle,
+ HCI_CONN_HANDLE_MAX);
+ status = HCI_ERROR_INVALID_PARAMETERS;
+ }
+
if (status) {
hci_le_conn_failed(conn, status);
goto unlock;