From d60507200485bc778bf6a5556271d784ab09d913 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed, 15 Dec 2021 02:14:48 +0300
Subject: [PATCH] arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema
Git-commit: d60507200485bc778bf6a5556271d784ab09d913
Patch-mainline: v5.18-rc1
References: git-fixes
Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.
While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).
Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org
Acked-by: Takashi Iwai <tiwai@suse.de>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 93570a61c2af..db57c115d262 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1740,8 +1740,8 @@ pcie0: pci@1c00000 {
phys = <&pcie0_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
@@ -1844,8 +1844,8 @@ pcie1: pci@1c08000 {
phys = <&pcie1_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
@@ -1950,8 +1950,8 @@ pcie2: pci@1c10000 {
phys = <&pcie2_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
--
2.31.1