From 0e7f74f691e14a9a9c17afd3902907d25b7254c3 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Mon, 13 Jun 2022 16:47:59 +0200
Subject: drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes
Git-commit: fb10dc451c0f15e3c19798a2f41d357f3f7576f5
Patch-mainline: v6.0-rc1
References: jsc#PED-1166 jsc#PED-1168 jsc#PED-1170 jsc#PED-1218 jsc#PED-1220 jsc#PED-1222 jsc#PED-1223 jsc#PED-1225 jsc#PED-2849
For interlaced modes the timings were not being correctly
programmed into the HDMI block, so correct them.
Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-33-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Patrik Jakobsson <pjakobsson@suse.de>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 03c2be9d57a8..9d48c6458bc4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1036,13 +1036,13 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
VC4_SET_FIELD(mode->crtc_vsync_start - mode->crtc_vdisplay,
VC5_HDMI_VERTA_VFP) |
VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL));
- u32 vertb = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
- interlaced,
+ u32 vertb = (VC4_SET_FIELD(mode->htotal >> (2 - pixel_rep),
+ VC5_HDMI_VERTB_VSPO) |
+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
VC4_HDMI_VERTB_VBP));
u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
VC4_SET_FIELD(mode->crtc_vtotal -
- mode->crtc_vsync_end,
+ mode->crtc_vsync_end - interlaced,
VC4_HDMI_VERTB_VBP));
unsigned long flags;
unsigned char gcp;
--
2.38.1