From: Kai-Heng Feng <kai.heng.feng@canonical.com>
Date: Tue, 21 Jun 2022 15:10:56 -0700
Subject: igb: Make DMA faster when CPU is active on the PCIe link
Patch-mainline: v5.19-rc4
Git-commit: 4e0effd9007ea0be31f7488611eb3824b4541554
References: jsc#PED-370
Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps
Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which
will be significantly lower when 1) ASPM is disabled or 2) SoC package
c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx
speed can reach to ~950Mbps.
According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC",
"DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so
set it to 1b for "DMA is considered idle when there is no Rx or Tx AND
when there are no TLPs indicating that CPU is active detected on the
PCIe link (such as the host executes CSR or Configuration register read
or write operation)" and performing Tx should also fall under "active
CPU on PCIe link" case.
In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init
code to separate function.") seems to wrongly changed from enabling
E1000_PCIEMISC_LX_DECISION to disabling it, also fix that.
Fixes: b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/intel/igb/igb_main.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -9901,11 +9901,10 @@ static void igb_init_dmac(struct igb_ada
struct e1000_hw *hw = &adapter->hw;
u32 dmac_thr;
u16 hwm;
+ u32 reg;
if (hw->mac.type > e1000_82580) {
if (adapter->flags & IGB_FLAG_DMAC) {
- u32 reg;
-
/* force threshold to 0. */
wr32(E1000_DMCTXTH, 0);
@@ -9938,7 +9937,6 @@ static void igb_init_dmac(struct igb_ada
/* Disable BMC-to-OS Watchdog Enable */
if (hw->mac.type != e1000_i354)
reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
-
wr32(E1000_DMACR, reg);
/* no lower threshold to disable
@@ -9955,12 +9953,12 @@ static void igb_init_dmac(struct igb_ada
*/
wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
(IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
+ }
- /* make low power state decision controlled
- * by DMA coal
- */
+ if (hw->mac.type >= e1000_i210 ||
+ (adapter->flags & IGB_FLAG_DMAC)) {
reg = rd32(E1000_PCIEMISC);
- reg &= ~E1000_PCIEMISC_LX_DECISION;
+ reg |= E1000_PCIEMISC_LX_DECISION;
wr32(E1000_PCIEMISC, reg);
} /* endif adapter->dmac is not disabled */
} else if (hw->mac.type == e1000_82580) {