From: Erik Ekman <erik@kryo.se>
Date: Thu, 9 Dec 2021 00:00:22 +0100
Subject: net: bna: Update supported link modes
Patch-mainline: v5.17-rc1
Git-commit: 7adf905333f4dd7965fe8a7c96a54cff70f7c354
References: jsc#PED-1521

The BR-series installation guide from https://driverdownloads.qlogic.com/
mentions the cards support 10Gbase-SR/LR as well as direct attach cables.

The cards only have SFP+ ports, so 10000baseT is not the right mode.
Switch to using more specific link modes added in commit 5711a98221443
("net: ethtool: add support for 1000BaseX and missing 10G link modes").

Only compile tested.

Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20211208230022.153496-1-erik@kryo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/brocade/bna/bnad_ethtool.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -235,13 +235,18 @@ static int
 bnad_get_link_ksettings(struct net_device *netdev,
 			struct ethtool_link_ksettings *cmd)
 {
-	u32 supported, advertising;
+	ethtool_link_ksettings_zero_link_mode(cmd, supported);
+	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
 
-	supported = SUPPORTED_10000baseT_Full;
-	advertising = ADVERTISED_10000baseT_Full;
+	ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseCR_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseSR_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseLR_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseCR_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseSR_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseLR_Full);
 	cmd->base.autoneg = AUTONEG_DISABLE;
-	supported |= SUPPORTED_FIBRE;
-	advertising |= ADVERTISED_FIBRE;
+	ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
 	cmd->base.port = PORT_FIBRE;
 	cmd->base.phy_address = 0;
 
@@ -253,11 +258,6 @@ bnad_get_link_ksettings(struct net_devic
 		cmd->base.duplex = DUPLEX_UNKNOWN;
 	}
 
-	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
-						supported);
-	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
-						advertising);
-
 	return 0;
 }