From 846651eca073e2e02e37490a4a52752415d84781 Mon Sep 17 00:00:00 2001
From: Shenwei Wang <shenwei.wang@nxp.com>
Date: Fri, 5 Aug 2022 09:45:29 -0500
Subject: [PATCH] serial: fsl_lpuart: RS485 RTS polariy is inverse
Git-commit: 846651eca073e2e02e37490a4a52752415d84781
Patch-mainline: v6.0-rc4
References: git-fixes

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Takashi Iwai <tiwai@suse.de>

---
 drivers/tty/serial/fsl_lpuart.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1381,9 +1381,9 @@ static int lpuart_config_rs485(struct ua
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	/* Store the new configuration */