From ae2d329f104b75a0a78dcaded29fe6283289cdf9 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed, 18 Jan 2023 10:16:46 +0200
Subject: [PATCH] drm/bridge: lt9611: fix sleep mode setup
Git-commit: ae2d329f104b75a0a78dcaded29fe6283289cdf9
Patch-mainline: v6.3-rc1
References: git-fixes
On atomic_post_disable the bridge goes to the low power state. However
the code disables too much of the chip, so the HPD event is not being
detected and delivered to the host. Reduce the power saving in order to
get the HPD event.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 3ce4e495aee5..95a962e62ae4 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -449,12 +449,11 @@ static void lt9611_sleep_setup(struct lt9611 *lt9611)
{ 0x8023, 0x01 },
{ 0x8157, 0x03 }, /* set addr pin as output */
{ 0x8149, 0x0b },
- { 0x8151, 0x30 }, /* disable IRQ */
+
{ 0x8102, 0x48 }, /* MIPI Rx power down */
{ 0x8123, 0x80 },
{ 0x8130, 0x00 },
- { 0x8100, 0x01 }, /* bandgap power down */
- { 0x8101, 0x00 }, /* system clk power down */
+ { 0x8011, 0x0a },
};
regmap_multi_reg_write(lt9611->regmap,
--
2.35.3