From: James Smart <jsmart2021@gmail.com>
Date: Mon, 4 Nov 2019 16:57:07 -0800
Subject: scsi: lpfc: Add enablement of multiple adapter dumps
Patch-mainline: v5.5-rc1
Git-commit: 171f6c41949f6e9d5e09dcac842a10bf8dda8dcc
References: bsc#1154601
Some adapters support the ability to hold multiple adapter dumps on the
adapter flash. Some adapters default to enabling this feature while others
default to single-dump.
Make support uniform by enabling dual dump by default.
Link: https://lore.kernel.org/r/20191105005708.7399-11-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Daniel Wagner <dwagner@suse.de>
---
drivers/scsi/lpfc/lpfc_hw4.h | 10 ++++++++++
drivers/scsi/lpfc/lpfc_sli.c | 27 ++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 1 deletion(-)
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3530,6 +3530,7 @@ struct lpfc_sli4_parameters {
#define LPFC_SET_UE_RECOVERY 0x10
#define LPFC_SET_MDS_DIAGS 0x11
+#define LPFC_SET_DUAL_DUMP 0x1e
struct lpfc_mbx_set_feature {
struct mbox_header header;
uint32_t feature;
@@ -3544,6 +3545,15 @@ struct lpfc_mbx_set_feature {
#define lpfc_mbx_set_feature_mds_deep_loopbk_SHIFT 1
#define lpfc_mbx_set_feature_mds_deep_loopbk_MASK 0x00000001
#define lpfc_mbx_set_feature_mds_deep_loopbk_WORD word6
+#define lpfc_mbx_set_feature_dd_SHIFT 0
+#define lpfc_mbx_set_feature_dd_MASK 0x00000001
+#define lpfc_mbx_set_feature_dd_WORD word6
+#define lpfc_mbx_set_feature_ddquery_SHIFT 1
+#define lpfc_mbx_set_feature_ddquery_MASK 0x00000001
+#define lpfc_mbx_set_feature_ddquery_WORD word6
+#define LPFC_DISABLE_DUAL_DUMP 0
+#define LPFC_ENABLE_DUAL_DUMP 1
+#define LPFC_QUERY_OP_DUAL_DUMP 2
uint32_t word7;
#define lpfc_mbx_set_feature_UERP_SHIFT 0
#define lpfc_mbx_set_feature_UERP_MASK 0x0000ffff
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6204,6 +6204,14 @@ lpfc_set_features(struct lpfc_hba *phba,
mbox->u.mqe.un.set_feature.feature = LPFC_SET_MDS_DIAGS;
mbox->u.mqe.un.set_feature.param_len = 8;
break;
+ case LPFC_SET_DUAL_DUMP:
+ bf_set(lpfc_mbx_set_feature_dd,
+ &mbox->u.mqe.un.set_feature, LPFC_ENABLE_DUAL_DUMP);
+ bf_set(lpfc_mbx_set_feature_ddquery,
+ &mbox->u.mqe.un.set_feature, 0);
+ mbox->u.mqe.un.set_feature.feature = LPFC_SET_DUAL_DUMP;
+ mbox->u.mqe.un.set_feature.param_len = 4;
+ break;
}
return;
@@ -7207,7 +7215,7 @@ lpfc_post_rq_buffer(struct lpfc_hba *phb
int
lpfc_sli4_hba_setup(struct lpfc_hba *phba)
{
- int rc, i, cnt, len;
+ int rc, i, cnt, len, dd;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mqe *mqe;
uint8_t *vpd;
@@ -7458,6 +7466,23 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
spin_unlock_irq(&phba->hbalock);
+ /* Always try to enable dual dump feature if we can */
+ lpfc_set_features(phba, mboxq, LPFC_SET_DUAL_DUMP);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ dd = bf_get(lpfc_mbx_set_feature_dd, &mboxq->u.mqe.un.set_feature);
+ if ((rc == MBX_SUCCESS) && (dd == LPFC_ENABLE_DUAL_DUMP))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_INIT,
+ "6448 Dual Dump is enabled\n");
+ else
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI | LOG_INIT,
+ "6447 Dual Dump Mailbox x%x (x%x/x%x) failed, "
+ "rc:x%x dd:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli_config_mbox_subsys_get(
+ phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(
+ phba, mboxq),
+ rc, dd);
/*
* Allocate all resources (xri,rpi,vpi,vfi) now. Subsequent
* calls depends on these resources to complete port setup.